OPERATION AND MAINTENANCE MANUAL PN 28.04.1014 GPU JET-POWER FILTER II 2500 PN 28.09.1013
PAGE 12/43
1.2.5.2 -
VENTILATION GRID
It has four (04) lines of shutters for internal ventilation.
Do not use plastics covers that seal. They are placed to prevent the entry
of water or rain splashes.
1.2.6 -
UPPER PART
1.2.3.1
FRONT AND COVER
To open the GPU unscrew first the two screws (one in each side of the
panel) and use the handle. To release the top cover, unscrew the screws
on the bottom side and lift the cover. The cover is heavy and may be
necessary more than one people to raise it.
It has a gutter under the spotlight to avoid rain water.
1.2.7 -
LOWER PART
1.2.7.1 -
CASTERS
Comes with 02 (two) fixed casters (PN 28.02.1203) and 02 (two) swivel
(PN 28.02.1203), with 6” wheel, brand “NOVEX”, of high durability.
1.2.7.2 -
CHASSIS (PN 28.02.4201)
The chassis is perfectly dimensioned for the weight to be supported. It
has reduced weight and high mechanical resistance.
1.2.8 -
NOTES
All pieces are manufactured following standard equality. They may be
replaced at any time without the need for adjustments in drilling, etc.
