Jet EQUIPMENT & TOOLS JCGG18 Скачать руководство пользователя страница 1

®Registered trademark of JET Equipment & Tools Ltd.

www.jetgroupbrands.com

M15-HT350166

Product Specifications

Charger Input Power: 120 V AC
Battery Output Power: 18 V DC
Battery Capacity: 1500 MAH
Battery Pack Charge Time: 75 min.
Maximum Operating Pressure: 10,000 PSI
Grease Reservoir Capacity: 14.5 Ounces
Maximum Flow Rate: 3.0 oz/min.
Hose Pressure Rating: 18,000 PSI
Weight: 20 lbs 

 
Safety Instructions

Failure to follow all instructions listed below may result in electric 
shock, fire, and/or serious injury. Please read carefully.

Work Area

1. Keep your work area clean and well lit. Cluttered benches and 

poorly lit areas may cause accidents.

2. Do not operate power tools in explosive atmospheres such as 

in the presence of flammable liquids, gases, or dust. Power 
tools create sparks that may ignite these materials.

3. Keep bystanders, children, and visitors away while operating 

a power tool. Distractions can lead you to lose control.

 
Electrical Safety

1. Avoid body contact with grounded surfaces such as pipes or 

couplers. There is an increased risk of electric shock if your 
body is grounded.

2. Do not expose power tools to rain or wet conditions. Water 

entering a power tool will increase the risk of electric shock.

Owner’s 

MANUAL

18 Volt Battery Operated Grease Gun

Prod. No. 350166
Mod. No. JCGG18

Содержание JCGG18









Отзывы: