JESSEM TOOL LIMITED WARRANTY
All JessEm products are warranted to be free
from defects in material and workmanship.
JessEm will repair or replace any product which
upon inspection proves to be defective for a
period of (1) year from dated receipt and proof
of purchase. All warranty claims should be
made direct to JessEm Tool Company. Contact
JessEm for a warranty claim return authorization
and instructions to proceed. The consumer is
responsible for shipping costs to return product
to JessEm Tool Company. We will repair or
replace the product at our discretion and
JessEm Tool will return shipment to you at no
charge.
WARRANTY LIMITATIONS
This warranty does not cover:
•
Repairs or alterations made or attempted by
anyone other than JessEm Tool Company or
an authorized JessEm service professional.
•
Normal wear and tear
•
Abuse, misuse or neglect.
•
Improper care or maintenance.
•
Continued use after partial failure.
•
Products that have been modified in any way.
•
Products used with improper accessories.
•
Premature thread wear due to adjusting
height with electric or cordless drill.
Figure 14
5. Slide the carriage back up ensuring the dowel
pin in the carriage aligns with the slot in the
carriage nut. (Figure 15)
Figure 15
6.
Place back the o-ring and carriage nut cap and
with the screws you removed in Step 2 (Figure
11) fasten the carriage nut cap securely
4. Turn the carriage nut clockwise ensuring
when you complete your adjustment that
the slot in the carriage nut aligns with one
of the slots on the anitbacklash nut. (Figure
14)
