Jersey Jack Pinball Dialed in!, Руководство по эксплуатации

Страница: 86 / 372

The Dialed In Menu System B-44
Use the Custom Graphic utility to install an image that will be displayed on the LCD monitor,
periodically, during the game’s attract mode. The custom image is uploaded or changed using the
Install Graphic
utility.
Note: The image must be loaded onto a USB memory stick, using a separate computer. It must be
in PNG or JPG format and under 2MB in size. Create a folder named “pinballimages” in the root
directory of the USB stick, then copy your graphic(s) into the folder. Power up the game, open the
coin door, and use the diagnostics buttons to enter the
Install Graphic
utility; the LCD monitor will
display the screen shown on the left in figure B34.
Locate the end of the USB extension cable, just inside the open coin door (to the left of the coin
box). Remove the Bluetooth dongle from the connector at the end of the cable and set it aside.
Fully insert the USB stick in its place (if your USB stick is equipped with an “in-use” light, it will
illuminate). The screen on the right in figure B34 will come up automatically, showing a listing of
the available graphics in your USB stick’s “pinballimages” folder.
Use the Up/+ and Down/- buttons to select the graphic you wish to install, then press the Enter
button to complete the operation.
To exit the Install Graphic utility at any time, press the Back/Escape button.
If you removed the game's Bluetooth dongle, plug it back into the end of the USB extension cable.
Figure B34. Install Graphic utility screens.
Install Graphic