Nobeltec
®
InSight Radar 2 - Black Box (IR2-BB)™
Installation
3
This chapter contains the primary steps required for successful
installation of the IR2-BB.
STEP 1 - IR2-BB Installation Preparation and Overview
The InSight Radar 2 - Black Box is designed and developed for reliability,
flexibility and proper installation and will help insure long life of the
product.
The IR2-BB’s exterior has been engineered for ease in adapting
to different mounting configurations depending on boat-specific
requirements. The elimination of rigid brackets offers the installer
the option to select the best mechanics for securing the IR2-BB. The
guidelines and recommendations in steps 1 and 2 provide helpful
information for the installer.
The following tools and material are recommended but are not supplied:
t
oolS
m
aterial
Screwdrivers; Small and Medium Sizes
Phillips, Robertson, Slot
Velcro wide strips
Adhesive backed flat cable tie holders
Digital Multimeter DMM Fluke
Various size cable ties
Heat gun
Double sided sticky tape
Wire cutters
Heat shrink tubing 1/8 to 1/4 OD
Wire strippers
Wire 16 AWG color red and black
Solder Iron 40 – 60 watts
Electrician's tape
Table 3.1 - Installation Tools
5
Содержание Nobeltec InSight Radar 2-Black Box
