![background image](http://html1.mh-extra.com/html/jensen/x-165/x-165_instructions_3819158001.webp)
X-165
160 Watt Powered Subwoofer
Congratulations on investing in one of JENSEN’s finest Subwoofer
Systems. You will find this information valuable for the
long term enjoyment of your X-165.
Your JENSEN X-165
is an integrated Active Subwoofer System with a single 10”
Heavy Duty Sub driver powered by an on-board 160 Watt RMS amplifier. You may string
additional X-165 subwoofers to your X-165 if so desired by connecting to the “Line Output”
section of your X-165’s amplifier (see “For Big Bass Lovers” section below).
Sit on Floor or build into Cabinetry:
With different room positioning, Bass
response can vary as Subwoofer frequencies are mainly non-directional.
On Floor:
Use any
location within room as Sub-Bass is non-directional.
Inbuilt:
As per diagram but be sure to allow
20mm (minimum) clearance on sides/rear and 140mm (minimum) on top. Cupboard internals to be
at least 650(H)x 430(W)x 390(D).
140mm
20mm
Fit 4 pcs Rubber
Acoustic Blocks
(supplied) to Gloss
Panel and stand unit up.
Internal
Dimensions
(mm)
650
min.
430
min.
390 min.
Plus door
Internal dimensions to
be at least 650 (H)
x 430(W)x 390(D)
+ door)
20
Door must be acoustically
transparent in front of Woofer and
Port area. This can be open weave
timber, rattan, metal or cloth. Black
“Acoustic cloth” can be ordered at
[email protected] or
on (03)9846 3996 Mon-Fri.
Port
Woofer