JWM9A
8
TUNER OPERATION
Select a Band
1.
Press
SOURCE
button (10), the LCD will display
“MODE” and enter mode selection.
2.
Press
SOURCE
button to navigate the available modes and choose radio mode.
3.
Press
ENTER
button (12) to confirm the selection of radio mode.
4.
Then, press
SOURCE
button to select the band (AM1, AM2, FM1, FM2 and FM3). Press
ENTER b
utton (12) to confirm the selection of radio mode.
Manual Tuning
Press the
>>|
or
|<<
buttons (14, 13) to seek stations up/down step by step.
Auto Seek Tuning
Press and hold
the
>>|
or
|<<
buttons (14, 13) to automatically seek the next or previous strong
station.
Preset Stations
Six numbered preset buttons store and recall stations for each AM and FM band.
Store a Station
Select a band (if needed), then select a station.
Press and hold
a 1-6 preset button for two
seconds. The present number will appear on the display.
Recall a Station
Select a band (if needed). Press a 1-6 preset button to select the corresponding stored station.
Automatically Store / Preset Scan (AS/PS)
Automatically Store
Select an AM or FM band.
Press and hold
the
AS/PS
button (8) for more than 3 seconds and the
unit will automatically scan for and store 12 or 18 strongest stations for AM or FM respectively.
To stop this function before the automatic storing is complete, press
AS/PS
again.
Preset Scan
Select a band. Press
AS/PS
button to scan stations stored in the current band. The unit will
pause for 10 seconds at each preset station. Press
AS/PS
again to stop scanning when the
desired station is reached.
