JWM92A
QUICK REFERENCE GUIDE
A
M
/F
M
T
u
n
e
r C
o
n
tr
o
ls
AUX
1
HDMI
USB
VOLUME:
Rotate
clockwise to increase
or counter-clockwise
to decrease the
active zone's volume.
BACK:
Press to exit PRESETS
MENU.
PRESETS MENU:
Press to
bring up PRESETS MENU.
Press repeatedly to cycle
through the stored channels.
Press ENTER KNOB to recall
stored channel.
STATION STORE PRESETS:
1. Press PRESET button to bring up PRESETS
MENU.
2. Press & Hold the ENTER KNOB store
current station.
NOTE: Up to 18 FM & 12 AM channels can be
stored.
FM MODE:
Press to change the
source to FM radio mode.
AM MODE:
Press to change the
source to AM radio mode.
AS/PS:
Press to SCAN
through currently stored
presets.
Press & Hold to STORE
strongest broadcast
stations in your area.
TUNE/SEEK/TRACK:
Press
button to tune
frequency
higher. Press button to
tune frequency lower. Press
and hold to scan to next
strongest station.
B
a
si
c O
p
e
ra
ti
o
n
RESET:
Use a ball
point pen or thin
metal object to
press the reset
buttons.
HDMI
IN:
Connect
HDMI cable
from
device.
AUX
1
HDMI
USB
POWER
:
Push to
turn ON or OFF.
VOLUME :
Rotate
the VOLUME KNOB
clockwise to
increase or counter-
clockwise to
decrease the active
zone's volume.
BACK
:
Press to exit
any menu.
AUX IN:
Insert
3.5mm cable
from your
portable media
device.
AUDIO
:
Press to bring up AUDIO
MENU options: BASS, TREBLE,
BALANCE (left to right)
& FADE
(front to back). LOUDNESS (on/off),
SUBWOOFER VOL, EQ: User, Flat,
Pop, Classic, Rock.
SETTINGS:
Press to bring up SETTINGS
MENU options: BLUETOOTH (ON/OFF),
BEEP (ON/OFF), TUNING REGION,
PRESET VOLUME, RCA OUTPUT and
RESET. VOLUME KNOB will adjust each
MENU option except for 'RESET'.
ZONES:
Press ZONES button to enter the
ZONES MENU for multi-source switching or
zone volume adjustment control.
AM:
Press to change the source to AM radio mode.
FM:
Press to change the source to FM radio mode.
DISC:
Press to change the source to Disc mode.
AUX:
Press to cycle
through FRONT AUX,
REAR AUX, COAXIAL,
OPTICAL, HDMI ARC and
HDMI IN mode. Press
ENTER KNOB to select.
Radio will auto-select after
a couple seconds of
inactivity.
USB:
Press to change the
source to USB mode.
BT:
Press to change the source to
BLUETOOTH mode. Press
and
Hold to
activate Bluetooth Pairing.
A
p
p C
o
n
tr
o
l
App
download
and
operation:
jControl
app
controls all
of the
primary functions of the
JWM92A directly from your
phone or table. It can be
downloaded from the App Store
on iTunes for Apple devices, or
the Google Play Store for
Android devices, and found by
searching for jControl.
After downloading and installing
the app, pair your device to the
JWM92A as instructed in the
Bluetooth Operation section in
this guide. Once your device is
paired, open the app and use as
instructed.(Device must be
paired to JWM92A before the
app can be used).
Forward
Play/ Pause/ Mute
Mode Menu
App Info
Mode Menu
Back
Power
Zone
Volume and
Settings
Z
o
n
e
s S
e
tt
in
g
s (
m
u
lt
i-
so
u
rc
e
)
AUX
1
HDMI
USB
VOLUME/SOURCE:
While in Zones
Menu, rotate to cycle through the
active source modes or adjust the
active zone's volume. Press ENTER
knob to select.
MULTI-SOURCE ZONES:
If Zone A is in AM, FM, BT, FRONT AUX or REAR
AUX mode, the multi-source function cannot be activated. Zone B and Zone C
source mode will follow Zone A.
If Zone A is in DISC, USB, COAXIAL, OPTICAL, HDMI IN or HDMI ARC mode, the
following sources are selectable for Zone B: AM, FM, BT, FRONT AUX, REAR
AUX as well as the current active Zone A source. Zone C source mode will follow
Zone B.
If Zone A and Zone B are both set to DISC, USB, COAXIAL, OPTICAL, HDMI IN,
or HDMI ARC mode, the following sources are selectable for Zone C: AM, FM, BT,
FRONT AUX, REAR AUX as well as the current active Zone A/B source.
ZONES SETTINGS:
Press to bring up the Zones menu. Press ZONES,
, or
repeatedly to cycle through the following settings
:
Zone A source mode selection, Zone A volume adjustment,
Zone B source mode selection, Zone B volume adjustment,
Zone C source mode selection, Zone C volume adjustment
Multi-source Zone Table
Zone A
AM, FM, BT, FRONT AUX or
REAR AUX
DISC, USB, COAXIAL,
OPTICAL, HDMI IN or HDMI
ARC
Same as Zone B (AM, FM,
BT, FRONT AUX, REAR
AUX)
AM, FM, BT, FRONT
AUX, REAR AUX, or
same as Zone A
AM, FM, BT, FRONT
AUX, REAR AUX, or same
as Zone A/B
DISC, USB, COAXIAL,
OPTICAL, HDMI IN or HDMI
ARC
Same as Zone A
Same as Zone A
Same as Zone A
Zone B
Zone C
The ZONE indicator shows
which zone is actively
being displayed and
controlled by the headunit.
