manualshive.com logo in svg
background image

 

                                      

 

Groove

  

410 

6 pce Home Theatre Speaker System. 

 

 

Congratulations in purchasing one of JENSEN‘s finest Speaker Systems to date. 

Read this manual carefully to ensure your system will provide you with many 

years of musical enjoyment. 

 

 
Voltage and fuse. 

Your Subwoofer has been factory set to 220/240 volts using 1.0 amp 

fuse. Fuse compartment is located at power lead input area on amplifier. 
 

Room Placement – Subwoofer:

   Best positioning for your Subwoofer is against a 

wall. Subwoofer Bass frequencies are non directional therefore can be placed anywhere in the room. 
Additional subwoofers can be purchased and “daisy-chained” together to operate as one for extra 
bass if required. Contact [email protected] for more information on this.   
 

Setup.   

You will need 5 Speaker Leads and 1 x RCA to 1 x RCA lead for subwoofer. Lengths 

are “room size dependent” and should have been supplied by your dealer upon purchase.

  

Connect 

all Maxi and Centre speakers to your Receiver/amplifier ensuring all connections are 

in phase.

 

 

Ie: 

Positive (+) wires at Receiver/amplifier end connect to Positive wires (+) at speaker end and vice 
versa with Negatives (-). See Fig. C. On your Receiver/amplifier, be sure to select “

SMALL

” when 

“telling” your receiver if you are using Large or Small Speakers. For your X-125 Subwoofer, you 
will need a 1RCA to 1 RCA lead (not supplied) as these come in varying lengths of 1 to 20 mtrs). 
One end connects to your receiver/amplifier and the other into either “L” or “R” Low Level Inputs 
on Subwoofer amplifier. There is no need to connect to both “L” and “R” as these are paralleled 
internally. See Fig B. 

 
Wall Mounting Maxi speakers:

   Each smart Wall bracket is  

in 2 parts – one part is attached to speaker and the other supplied loose and attaches  
to wall. Look closely at this Wall part and you will notice one “C” curve is longer than  
the other (Fig. A) this will allow speaker when mounted to angle left or right when wall  
mounted. When mounted vertically speaker will aim straight forward and can swivel left. Reverse 
the bracket 180 degrees and speaker will then aim forward and can swivel right. Screws supplied and 
screw spacing is 

131.0

 mm.

  

   

 
 
 
 
 
 

fig. 

Отзывы: