background image

How to Install the CM715K AM/FM
Stereo Receiver/Cassette Tape
Player/CD Player

Installation

.............................

2

Before You Begin Installation ..... 2

Tools and Supplies Needed ....... 2

Speaker Requirements .............. 2

Prepare Radio for
Installation .................................. 2

Adapters for Easier
Installation .................................. 2

• Connections ........................ 3

• Crimp Connections ............. 3

• Upgrading your System ...... 3

Disconnect Battery ..................... 4

Remove Old Radio ..................... 4

Wiring

.......................................

5

• Fuse Adapters ..................... 5

Wiring with a Wiring Adapter ...... 6

Connect Wires ............................ 6

Wiring Color Codes .................... 6

Attach Wires to Radio ................ 6

Install Wiring Inside the Car ....... 6

Wiring Diagram–Advanced
Installation .................................. 7

Testing

....................................

8

Reconnect Battery ...................... 8

Test Power Wiring ...................... 8

View/Set the Clock ..................... 8

Test Antenna Connection ........... 8

Test Memory Wiring ................... 8

Test Speaker Connections ......... 9

• Balance ............................... 9

• Fader .................................. 9

Attach Brackets ........................ 10

• GM .................................... 10

• Dodge/Chrysler/Plymouth .. 11

• Jeep Grand Cherokee,

Dodge Avenger,
Plymouth Sebring ............. 11

Troubleshooting

................

12

Reset Button ............................ 12

Specifications
and Warranty

......................

13

Contents

 Technical Assistance

For technical assistance with the installation of the
CM715K, call 1-800-323-0221.

Installation

Welcome!

What you're holding in your hands is no ordinary owner's
manual. We've tried to make the instructions in this book
clear and easy to follow.

For your Jensen stereo to work right, it must be installed
correctly. This manual will show you how to install your new
stereo like a pro. It's a good idea to read all of these instruc-
tions before you begin the installation. Most installations are
straightforward and can be handled by a do-it-yourselfer with
the right tools, patience, and the ability to follow instructions.
But, do-it-yourself installation isn't for everyone. If you still
don't feel confident after reading this book, consider turning
the installation job over to someone better suited to it.

Warranty Service

If your Jensen stereo should ever require service, you will
need to have the original dated receipt. If you ever need to
return the unit for any reason, always include the receipt
with the product.

®

VOL

VOL

COMPA

CT

DIGITAL AUDIO

®

4 X 50W CD/CASSETTE

INSTALOC II TUNER

CDC CONTROLLER

CM715K

SCN

RPT

RPT
A-B

3

MEM
CLR

6

2

RDM

4

PGM

5

1

CDC

BAND

TAPE

SEL

DISC

PWR

A.PS

CD

LOUD

DISP

MUTE

PROG

MO

RESET

Untitled-3

4/10/99, 7:38 PM

1

Содержание CM715K














Отзывы: