9
iP od DOC K ING
T his model includes adaptors for adopting different iP od models. If the docking bay will not be used for
an
1. S elect a suitable adaptor for your iP od and insert it into the docking bay
2.
F or docking an iP od nano, slide the dock connector to the left and also
see note on
of this instruction manual.
F or other iP od models, slide the dock connector to the right (
and
3. Insert your iP od
extended period of time, it is recommended to use the "Dock C over" insert to help protect the docking
connector.
.
Y our iP od can now be docked by placing the connector on the bottom of
the iP od directly over the dock connector located in the docking bay.
S eat the iP od on the dock connector to assure a proper connection.
center position)
insert the iP od adaptor for the type of iP od you are using.
with the connector facing down and positioned directly over the dock connector located
in the docking bay. S eat the iP od on the dock connector to assure a proper connection.
" DOC K ING 1st AND 2nd G E NE R AT ION iP od nanos "
section
Note: When docking your iP od, please be careful to avoid damaging the 30-pin connectors located on
the iP od and in the docking bay.
4. S lide the A udio Input S elector switch on the back of the unit to iP od position.
5. P ress the ON/S T A NDB Y button to turn On the main unit.
6. P ress the P L A Y / PA US E button from the R emote C ontrol to pause or resume iP od playback.
7. Adjust the sound level by pressing the V OL UME + / - buttons.
Note : T he V olume level cannot be adjus ted us ing the volume control on your iP od when
docked.
8. T he iP od charges even during playback.
9. To remove the iP od from the Docking
,
press and hold the P L A Y /PA US E button for three seconds
iP od playback control from remote control:
- P ress the P L A Y /PA US E button to pause or resume the iP od playback;
- P ress the iP od S kip/S earch F orward or B ackward button to skip to the next or previous song;
- P ress and hold the iP od S kip/S earch F orward or B ackward button for fast-forwarding or
fast-rewinding during playback.
bay
to switch off the iP od. You can now gently remove it from the docking bay.
8
SYSTEM PLACEMENT
We recommend that you place the JiSS-330 properly on your desk, counter or table.
The unit produces exceptional sound from any listening position in the room.
However, the best quality sound and surround sound effects will be heard with the unit
placed directly in front of you and facing you.
1-6ft
Preferred
Not Preferred
Preferred
Not Preferred
PC
USER
PC
USER
PC
USER
PC
USER
1-6ft
Refer to your iPod operation manual to adjust the "EQ" setting on your iPod. This will enhance the
sound and also help adjust the sound to the room you are using it in.
Ins e rt the iP od
a da ptor into the
docking bay
D ock your iP od
with the conne ctor
in the docking ba y
