Modelno: AL7000AC
This equipment may be operated in all EU and EFTA countries: AT, BE, BG, CY, CZ, DK, EE, FI,
FR, DE, GR, HU, IS, IE, IT, LV,LI, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, TR, GB
PRODUCT USAGE RESTRICTIONS: This product is intended for indoor use only.
Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive):
Hereby, Jensen Scandinavia AS, declares that this wireless router is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of confirmity may be consulted at www.jensenscandinavia.com/rtte/
Installation Guide
Internet port
Please connect your
broadband modem
to the internet port.
Power connector
Network ports
Ports for connecting network
devices by cable, such as computer,
Media Server, Network printer
VOIP adapter etc.
USB port
USB port for connecting
a printer or USB hard disk drive.
Reset / WPS*
Reset: Hold for about 10 seconds to
reset AL5000ac to factory default.
WPS: Hold for about to 2-5 seconds
to initiate WPS connection.
* WPS is disabled as default
and needed to be activated in
router GUI (http://192.168.38.1)
beforeuse.
WPS LED
WPS status LED.
WPS LED is
flashing when
setting up a WPS
connection.
2.4GHz LED
LED that show status
for the 2.4GHz network.
The LED will flash when
active.
5GHz LED
LED that show status
for the 5GHz network.
The LED’s will flash
when active.
Network ports LED
Show status for devices
that are connected to
the router by cable.
Internet LED
LED that show
status for the
Internet port.
The LED will flash
when active.
USB LED
Indicates if the
USB port is
correctly
connected.
Sys Led
Displays a
blinking light
when functioning
correctly
Power LED
Displays a solid light
upon powerup
