Jeld-Wen JII-90048, Руководство по установке

Страница: 4 / 12

INSTALLING SCREEN
1
Apply
A
B A
B A
CASSETTE
ASSEMBLY
CORDS
B
A
B
A
SCREEN
ASSEMBLY
CASSETTE
ASSEMBLIES
MASKING
TAPE
ii. SNAP
i. INSERT
Installation Instructions
for Siteline
®
Low-Friction Glider
™
Wall System Brio
®
Pleated Screens
Distributed by JELD-WEN
®
(JII-90048)
4
Note : Unwrap cables and stretch out cassette assemblies and cables
being careful to avoid tangling of cords .
Note: Carefully remove wrapping . Ensure that the screen assembly is
tightly compressed .
a. Wrap Screen
Using low adhesive tape, wrap the screen tightly against the jamb . Tape
may be factory applied . Do NOT remove until after screen has been
installed in step “B” .
b. Insert and Snap
Insert screen assembly into screen sill and snap into place in the jamb
mount . Assembly is non-handed .
c. Align Cords
Stretch out cassette assemblies and cords, ensuring cords are tracking on
end rollers .
NOTE: Ensure the cords are not twisted or tangled .
Ensure cords
are aligned
on individual
rollers .
Align cords
on rollers .
d. Cassette Assembly