PB10 (PBE)
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Group Ltd is prohibited.
11
3.3. Installing the motor
When using air motor, insert it into the machine (
1
, Fig. 4) so that the arbor is placed
in the socket (
2
). Then, rotate the motor to the left (
3
) to tighten it.
To install electric motor, insert and press the MT3 arbor into the motor (
4
). Slide
the clamping ring (
5
) onto the motor, and then insert the motor into the machine (
6
)
by placing the arbor in the socket (
2
). Next, use the 6 mm hex wrench to tighten the
clamping ring (
7
). Finally, set the rotation direction switch to the position R as shown
in Fig. 1.
Fig. 4.
Installing the air and electric motor
3
4
6
2
1
5
7
