Jegs IGBT Series, Руководство пользователя

Страница: 18 / 30

17
Position of MIG Torch
The angle of MIG torch to the weld has an effect on the width of the weld
The welding gun should be held at an angle to the weld joint. (See Secondary Adjustment Variables below) Hold the gun
so that the welding seam is viewed at all times. Always wear the welding helmet with proper filter lenses and use the
proper safety equipment.
CAUTION
Do not pull the welding gun back when the arc is established. This will create excessive wire extension (stick ‐ out) and
make a very poor weld.
The electrode wire is not energized until the gun trigger switch is depressed. The wire may therefore be placed on the
seam or joint prior to lowering the helmet.