Installation Instructions for 81952
Lithium Jump Starter
with Automatic Voltage Detector
WARNING
•
Read, understand and follow all instructions, cautions and warnings listed in this instruction manual, those
published by your vehicle battery manufacturer & manufacturers of any device intended to be used with this unit.
Failure to follow all instructions and abide by all cautions and warnings could result in personal injury, injury to
others and property damage. Save these instructions for future reference.
•
Use this product with 12V& 24V lead-acid batteries only. DO NOT connect to 6V DC batteries.
•
DO NOT use with dry-cell batteries, these batteries may burst and may cause injury to person or damage personal
property.
•
Never charge or jump-start a vehicle with a frozen battery.
•
DO NOT face battery. Stay as far as possible from vehicle battery being jumped when making final connection.
•
Working around lead-acid batteries may be dangerous. Lead-acid batteries generate explosive gases during
normal charging and jump-starting operations.
•
All lead-acid batteries (car, truck & boat) produce hydrogen gas, which may violently explode in the presence of fire
or sparks. DO NOT smoke, use matches, lighters or open flame near batteries.
•
DO NOT operate this device or place this product near flammable materials or any location, which accumulate
flammable fumes.
•
Do not submerge in water, or expose unit to heavy moisture or rain.
•
This product is not intended for use in the rain or temperature above 140° F.
•
Some late model vehicles have on-board computers that might be damaged if jump-started. Always read the
vehicle owner's manual before attempting to jumpstart (battery boost) the vehicle to determine if external-starting
assistance is acceptable.
•
Stay clear of fan blades, belts, pulleys and moving parts that can cause bodily injury during battery jump-start.
1-800-345-4545 jegs.com
