background image

Page 

5

JEGS  is  dedicated  to  providing  you  with  the  best  possible  equipment  to  meet  your  demanding  jobs.  In  order  to  go 

beyond delivering a quality product we offer technical support to assist you with any questions that may arise. With proper 

use and care this plasma cutter should deliver years of trouble free service.  

Safe operation and proper maintenance is your responsibility.

  

This instruction guide is intended to instruct you in basic safety, operation and maintenance of your plasma cutter to 

ensure  you the best possible experience. Please carefully read this manual prior to use. Subjects covered in this manual 

include usage and how to improve performance. 

The warranty does not cover improper use, maintenance or consumables. Do not attempt to alter any piece or part of your 

unit, particularly any safety device. Keep all shields and covers in place during unit operation should an unlikely failure of 

internal components result in the possible presence of sparks and explosions. If a failure occurs, discontinue further use 

until malfunctioning parts or accessories have been repaired or replaced.  

Note on High Frequency electromagnetic disturbances: 

Certain cutting processes generate High Frequency (HF) waves.

These waves may disturb sensitive electronic equipment such as televisions, radios, computers, cell

phones, and related equipment. HF may also interfere with fluorescent lights. Consult an electrician if any

of these disturbance is noted. Sometimes, improper wire routing or poor shielding may be the cause.

HF can interfere with pacemakers.

 Always consult your physician before using, or entering an area 

known to have cutting equipment, if you have a pacemaker.  

WARNING

! Persons with pacemakers should not cut or be in the cutting area until they consult with their 

physician. Some pacemakers are sensitive to EMF radiation and could be severely damaged while cutting 

or being in the vicinity of someone cutting. 

Serious injury or death may occur! 

Plasma cutting processes generate electromagnetic fields and radiation.

 While the effects of 

(Electromagnetic Fields) EMF radiation are not known, it is suspected that there may be some harm from 

long term exposure. Therefore, limit exposure with the following precautions:

 

Arrange

 leads and lines neatly away from the body.

 Never coil cables around the body.

 Keep all cables and leads on the same side the body.

 Never stand between cables or leads.

 Keep as far away from the power source (plasma cutter) as possible while cutting.

 Never stand between the ground clamp and the torch.

 Keep the ground clamp grounded as close to the cut as possible.

1-800-345-4545   jegs.com

Отзывы: