Installation Instructions for 81426
Hydraulic Lift Cart
500 lb. Capacity
Specifications
Capacity
500 lb.
Lift Range
9-
1/4” to 28-1/2”
Table Size
27-
3/4” x 17-3/4”
Important Safety Information
Assembly Precautions
1. Wear ANSI-approved safety goggles and heavy-duty gloves during assembly and use.
2. Keep assembly area clean and well lit.
3. Assemble only according to these instructions. Improper assembly can create hazards.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of drugs or medication.
Use Precautions
1. Do not exceed 500 lb. max weight capacity. Be aware of dynamic loading! Sudden load movement may briefly create
excess load causing product failure.
2. Use only on flat, level and hard surface capable of supporting the Lift Table and any item(s) placed on table. Evenly
distribute load on table to avoid tipping.
3. Use as intended only. Do not use Lift Table to lift or transport people.
4. Follow all hydraulic bleeding instructions specified in this manual.
5. This product is not a toy. Do not allow children to play with or near this item.
6. Use as intended only.
7. Do not adjust Safety Valve.
8. Keep clear of load while lifting and lowering.
9. Lower load slowly.
10. Do not use for aircraft purposes.
11. Inspect before every use; do not use if parts are loose or damaged.
12. Maintain product labels and nameplates. These carry important safety information.
Assembly Instructions
Read the entire IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text subheadings therein
before setup or use of this product.
1. With assistance, grip the Base (9) of the Hydraulic Lift Table and
lift it from the box. Do not just grip the Table. Doing so will leave the
unit's frame in the packaging
.
Wheels
(12)
2. Alternative: set the packaging sideways, grip the Base, and slide
Lock Nuts (11)
the Lift Table out of the box
Washers (29)
3. Turn the Lift Table on its side.
Bushings
(13)
Bolts (14)
Figure A
1-800-345-4545 jegs.com
