18
●
Take care that there is sufficient ventilation during welding. There is at least 30cm free distance
between the machine and wall.
§4.7 Operation Notices
●
Read §1 carefully before use this equipment.
●
Connect the ground wire with the machine directly.
●
In case closing the power switch, no-load voltage may be exported. Do not touch the output
electrode with any part of your body.
●
Before operation, no concerned people should be left. Do not watch the arc in unprotected eyes.
●
Ensure good ventilation of the machine to improve duty ratio.
●
Turn off the engine when the operation finished to economize energy source.
●
When power switch shuts off protectively because of failure. Don’t restart it until problem is
resolved. Otherwise, the range of problem will be extended.
