SPECIFICATIONS
Output Power
330 watts @ 8 ohms / 650 watts @ 4 ohms
Frequency Response
5 Hz - 90 kHz, - 3 dB
S/N Ratio
95 dB, ref. 1.0 watt @ 8 ohm load
Output Noise
<55
µ
v, 20 Hz – 20 kHz, unweighted
Input Impedance
40k ohms
THD + Noise
<0.001% from 2.0 kHz - 20 kHz, gradually increasing
below 2.0 kHz due to amorphous core input transformer
Damping Factor
>500, 20 Hz - 20 kHz
Overall Gain / Bal. or Unbal.
26 dB
Common Mode Rejection Ratio
> 90 dB, 20 Hz – 20 kHz
Absolute Phase Non-inverting
Pin 2 Positive
Inputs
Balanced (XLR)
Outputs
2 pair parallel binding posts
Power Consumption Idle
85 watts/VA, power factor corrected at all power levels
Power Consumption Standby
0.3 watt
Amplifier Weight
54 lbs. / 24.5 kg (each)
Amplifier Shipping Weight
64 lbs. / 29 kg (each)
Amplifier Dimensions (h/w/d)
5.75” x 15.5” x 16.25” / 146mm x 394mm x 413mm (each)
PAGE 12