REAR PANEL
1.
AC MAINS INPUT CONNECTOR.
Install the AC Power Cable into the AC input connector between
the ampli
fi
er and your AC mains outlet.
2.
INPUT.
Balanced XLR. Use XLR to RCA input adaptor for RCA input capability.
3.
LOUDSPEAKER OUTPUTS.
Unscrew the knob on either the
SPEAKER OUTPUT A
or the
SPEAKER
OUTPUT B
CONNECTORS
and pull the securing block out far enough to allow access to the binding
posts. Install the positive (usually red) loudspeaker cable spade terminal to the positive (+) binding
post and the negative (usually black) spade terminal to the negative (–) binding post. Secure the
loudspeaker connections by tightening the knob securely with your
fi
ngers.
4.
REMOTE ON/OFF.
A 1/8” (3.5 mm) mini-plug connector is provided on the rear panel of the
MODEL
735 MONOBLOCK AMPLIFIER
for remotely switching the ampli
fi
er between Operational and Standby
modes. When connected to another component with the proper circuitry, the ampli
fi
er standby
function can be turned
ON
and
OFF
remotely.
Figure 2:
Rear Panel
PAGE 11
