16
STARTING AND OPERATING
4WD High PT/4WD High AUTO To 4WD Low Or
4WD Low To 4WD High PT/4WD High AUTO
With the vehicle rolling at 2 to 3 mph (3 to
5 km/h), shift the transmission into NEUTRAL
(N). While the vehicle is coasting at 2 to 3 mph
(3 to 5 km/h), shift the transfer case lever firmly
to the desired position. Do not pause with the
transfer case in N (Neutral). Once the shift is
completed, place the transmission into DRIVE.
NOTE:
Shifting into or out of 4WD Low is possible with
the vehicle completely stopped; however, diffi
-
culty may occur due to the mating teeth not
being properly aligned. Several attempts may
be required for clutch teeth alignment and shift
completion to occur. The preferred method is
with the vehicle rolling at 2 to 3 mph
(3 to 5 km/h). Avoid attempting to engage or
disengage 4WD Low with the vehicle moving
faster than 2 to 3 mph (3 to 5 km/h).
FUEL SAVER TECHNOLOGY 6.4L
This feature offers improved fuel economy by
shutting off four of the engine's eight cylinders
during light load and operation. The system is
automatic with no driver inputs. It is not
available in 4WD Low. There is also a four
cylinder indicator in the instrument cluster to
indicate when this feature is active.
NOTE:
This system may take some time to return to full
functionality after a battery disconnect.
TRAILER TOWING
In this section you will find safety tips and
information on limits to the type of towing you
can reasonably do with your vehicle. Before
towing a trailer, carefully review this information
to tow your load as efficiently and safely as
possible.
To maintain the New Vehicle Limited Warranty
coverage, follow the requirements and
recommendations in this manual concerning
vehicles used for trailer towing.
WARNING!
Failure to engage a transfer case position
completely can cause transfer case damage
or loss of power and vehicle control. You
could have a collision. Do not drive the
vehicle unless the transfer case is fully
engaged.
20_JL_OM_EN_US_t.book Page 16
