inform you of your phone and network status
when you are attempting to make a phone call
using Uconnect
姞
Phone. The status is given for
roaming, network signal strength, phone battery
strength, etc.
Dialing Using the Mobile Phone Keypad
You can dial a phone number with your mobile
phone keypad and still use the Uconnect
姞
Phone (while dialing via the mobile phone key-
pad, the user must exercise caution and take
precautionary safety measures). By dialing a
number with your paired Bluetooth
姞
mobile
phone, the audio will be played through your
vehicle’s audio system. The Uconnect
姞
Phone
will work the same as if you dial the number
using Voice Command.
NOTE:
Certain brands of mobile phones do not
send the dial ring to the Uconnect
姞
Phone to
play it on the vehicle audio system, so you
will not hear it. Under this situation, after
successfully dialing a number the user may
feel that the call did not go through even
though the call is in progress. Once your call
is answered, you will hear the audio.
Mute/Un-Mute (Mute Off)
When you mute the Uconnect
姞
Phone, you will
still be able to hear the conversation coming
from the other party, but the other party will not
be able to hear you. In order to mute the
Uconnect
姞
Phone:
•
Press the
button.
•
Following the beep, say “Mute”.
In order to un-mute the Uconnect
姞
Phone:
•
Press the
button.
•
Following the beep, say “Mute off”.
Advanced Phone Connectivity
Transfer Call to and from Mobile Phone
The Uconnect
姞
Phone allows ongoing calls to
be transferred from your mobile phone to the
Uconnect
姞
Phone without terminating the call.
To transfer an ongoing call from your Uconnect
姞
Phone paired mobile phone to the Uconnect
姞
Phone or vice versa, press the
button and
say “Transfer Call”.
Connect or Disconnect Link Between the
Uconnect
姞
Phone and Mobile Phone
Your mobile phone can be paired with many
different electronic devices, but can only be
actively connected with one electronic device at
a time.
If you would like to connect or disconnect the
Bluetooth
姞
connection between a Uconnect
姞
Phone paired mobile phone and the Uconnect
姞
Phone, follow the instructions described in your
mobile phone User’s Manual.
List Paired Mobile Phone Names
•
Press the
button to begin.
•
After the “Ready” prompt and the following
beep, say “Setup Phone Pairing”.
•
When prompted, say “List Phones”.
•
The Uconnect
姞
Phone will play the phone
names of all paired mobile phones in order
from the highest to the lowest priority. To
“select” or “delete” a paired phone being
announced, press the
button and say
“Select” or “Delete”. Also, see the next two
sections for an alternate way to “select” or
“delete” a paired phone.
71
PAGE POSITION: 73 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1