
3. Shift the automatic transmission into NEU-
TRAL or depress the clutch pedal on a manual
transmission.
4. Turn the engine OFF.
5. Shift the transfer case lever into NEUTRAL
(N).
6. Start the engine.
7. Shift the transmission into REVERSE.
8. Release the brake pedal (and clutch pedal
on manual transmissions) for five seconds and
ensure that there is no vehicle movement.
9. Repeat Steps 7 and 8 with automatic trans-
mission in DRIVE or manual transmission in first
gear.
10. Turn the engine OFF.
11. Firmly apply the parking brake.
12. Shift the transmission into PARK or place
manual transmission in gear (NOT in Neutral).
CAUTION!
Damage to the transmission may occur if the
transmission is shifted into PARK with the
transfer case in NEUTRAL (N) and the en-
gine running. With the transfer case in NEU-
TRAL (N) ensure that the engine is OFF
before shifting the transmission into PARK.
13. Attach the vehicle to the tow vehicle using a
suitable tow bar.
14. Release the parking brake.
Shifting Out of NEUTRAL (N)
Use the following procedure to prepare your
vehicle for normal usage.
1. Bring the vehicle to a complete stop, leaving
it connected to the tow vehicle.
2. Firmly apply the parking brake.
3. Turn the ignition switch to the LOCK/OFF
position.
4. Turn the ignition switch to the ON/RUN po-
sition, but do not start the engine.
5. Press and hold the brake pedal.
6. Shift the transmission into NEUTRAL.
7. Shift the transfer case lever to the desired
position.
NOTE:
When shifting the transfer case out of NEU-
TRAL (N), turning the engine OFF may be
required to avoid gear clash.
8. Shift the automatic transmission into PARK,
or place manual transmission in Neutral.
9. Release the brake pedal.
10. Disconnect vehicle from the tow vehicle.
11. Start the engine.
12. Press and hold the brake pedal.
13. Release the parking brake.
14. Shift the transmission into gear, release the
brake pedal (and clutch pedal on manual trans-
missions), and check that the vehicle operates
normally.
265
PAGE POSITION: 267 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1