
•
Left/Right Rear Door Ajar (one or more doors
open, with a single chime if speed is above
1 mph (1.6 km/h))
•
Door(s) Ajar (with a single chime if vehicle is
in motion)
•
Liftgate Ajar (with a single chime)
•
Check Gascap (refer to “Adding Fuel” in
“Starting And Operating” for more details)
•
Service Park Assist System (with a single
chime)
•
Oil Change Required (with a single chime)
•
ECO (Fuel Saver Indicator) — If Equipped
•
Stop/Start Not Ready — Diesel Manual
Transmission Only (refer to “Stop/Start Sys-
tem” in “Starting And Operating” for more
details)
•
Stop/Start Ready — Diesel Manual Trans-
mission Only (refer to “Stop/Start System” in
“Starting And Operating” for more details)
•
Stop/Start Auto Stop Active — Diesel Manual
Transmission Only (refer to “Stop/Start Sys-
tem” in “Starting And Operating” for more
details)
•
Stop/Start Key Start Required — Diesel
Manual Transmission Only (refer to “Stop/
Start System” in “Starting And Operating” for
more details)
•
Service Stop/Start System — Diesel Manual
Transmission Only (refer to “Stop/Start Sys-
tem” in “Starting And Operating” for more
details)
•
Stop/Start System Page — Diesel Manual
Transmission Only (refer to “Stop/Start Sys-
tem” in “Starting And Operating” for more
details)
•
Low Tire Pressure
•
Service TPM System — (refer to “Tire Pres-
sure Monitoring System” in “Starting and
Operating” for more details)
•
Premium TPM System Graphic Display
Oil Change Required
Your vehicle is equipped with an engine oil
change indicator system. The “Oil Change Re-
quired” message will flash in the EVIC display
for approximately 10 seconds after a single
chime has sounded to indicate the next sched-
uled oil change interval. The engine oil change
indicator system is duty cycle based, which
means the engine oil change interval may fluc-
tuate dependent upon your personal driving
style.
Unless reset, this message will continue to
display each time you turn the ignition switch to
the ON position. To turn off the message tem-
porarily, press and release the MENU button. To
reset the oil change indicator system (after
performing the scheduled maintenance), per-
form the following procedure:
1. Turn the ignition switch to the ON position.
Do not start the engine.
2. Fully depress the accelerator pedal slowly
three times within 10 seconds.
3. Turn the ignition switch to the LOCK posi-
tion.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indica-
tor system did not reset. If necessary, repeat
this procedure.
176
PAGE POSITION: 178 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1