
start. If the bulb does not come on when turning
the key from OFF to ON/RUN, have the condi-
tion checked promptly.
Certain conditions, such as a loose or missing
gas cap, poor quality fuel, etc., may illuminate
the light after engine start. The vehicle should
be serviced if the light stays on through several
typical driving styles. In most situations, the
vehicle will drive normally and will not require
towing.
CAUTION!
Prolonged driving with the MIL on could
cause damage to the engine control system.
It also could affect fuel economy and drivabil-
ity. If the MIL is flashing, severe catalytic
converter damage and power loss will soon
occur. Immediate service is required.
WARNING!
A malfunctioning catalytic converter, as ref-
erenced above, can reach higher tempera-
tures than in normal operating conditions.
This can cause a fire if you drive slowly or
park over flammable substances such as dry
plants, wood, cardboard, etc. This could re-
sult in death or serious injury to the driver,
occupants or others.
27. Electronic Stability Program (ESP) Indi-
cator Light / Traction Control System (TCS)
Indicator Light
If the Electronic Stability Program
(ESP) / Traction Control System
(TCS) Indicator Light begins to
flash during acceleration, ease up
on the accelerator and apply as
little throttle as possible. This indicator light
starts to flash as soon as the tires lose traction
and the Electronic Stability Program (ESP) be-
comes active. The ESP/TCS Indicator Light
also flashes when TCS is active. Be sure to
adapt your speed and driving to the prevailing
road conditions. If the ESP/TCS Indicator Light
is on solid, the ESP system has been turned off
by the driver or a temporary condition exists that
will not allow full ESP function.
28. O/D (Overdrive) OFF Indicator Light
This light will illuminate when the O/D
OFF button has been selected and
overdrive has been turned off. The O/D
OFF button is located on the center console.
29. Sway Bar Indicator Light — If Equipped
This light will illuminate when the
front sway bar is disconnected.
30. Electronic Stability Control (ESC) OFF
Indicator Light — If Equipped
This light indicates the Electronic
Stability Control (ESC) is off.
169
PAGE POSITION: 171 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1