
b. Lay the soft top into the rear of the
vehicle with the bows pointing forward
and the curved portion of the bows facing
upward.
c. Reattach the knuckles onto the metal
pivot brackets.
NOTE:
To aid in reattaching the knuckles, you may
carefully tap on the knuckles using a rubber
mallet.
d. Screw the pivot screws back into place
using a #T30 Torx
姞
head driver. Secure
them until they are snug, being careful
not to cross-thread the screws or over-
tighten.
CAUTION!
Do not overtighten the screws. You can strip
the screws if they are overtightened.
5. Remove the swing gate bar (black metal bar
for bottom of rear window) and set aside.
NOTE:
Be sure the wire harness in the left rear
corner is not tangled in the soft top bows
before you lift the top.
6. Unsnap and remove the black boot cover.
This cover should be discarded. It was intended
as a protective cover for shipping only.
NOTE:
A visual instruction sheet is enclosed in the
dual top wrap.
7. Put up the soft top. Refer to “Soft Top —
Putting Up The Soft Top” in this section.
103
PAGE POSITION: 105 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1