Jeep GRAND CHEROKEE L 2023, Руководство пользователя

Страница: 169 / 424

STARTING AND OPERATING 167
NOTE:

The driver is always responsible for controlling
the vehicle, responsible for any surrounding
objects, and must intervene as required.

The system is designed to assist the driver and
not to substitute the driver.

During a semi-automatic maneuver, if the driver
touches the steering wheel after being
instructed to remove their hands from the
steering wheel, the system will cancel, and the
driver will be required to manually complete the
parking maneuver.

The system may not work in all conditions (e.g.
environmental conditions such as heavy rain,
snow, etc., or if searching for a parking space
that has surfaces that will absorb the ultrasonic
sensor waves).

New vehicles from the dealership must have at
least 30 miles (48 km) accumulated before the
ParkSense Active Park Assist system is fully cali -
brated and performs accurately. This is due to
the system’s dynamic vehicle calibration to
improve the performance of the feature. The
system will also continuously perform the
dynamic vehicle calibration to account for differ -
ences such as over or under inflated tires and
new tires.
E
NABLING
A
ND
D
ISABLING
T
HE
P
ARK
S
ENSE
A
CTIVE
P
ARK
A
SSIST
S
YSTEM
The ParkSense Active Park Assist system
can be enabled and disabled with the
ParkSense Active Park Assist switch,
located on the switch panel above the
Uconnect display.
To enable or disable the ParkSense Active Park
Assist system, push the ParkSense Active Park
Assist switch once (LED turns on). Pushing the
switch a second time will disable the system (LED
turns off).
The ParkSense Active Park Assist system will turn
off automatically for any of the following
conditions:

Parking maneuver is completed

Vehicle speed is greater than 18 mph
(30 km/h) when searching for a parking space

Vehicle speed is greater than 5 mph (7 km/h)
during active steering guidance into the parking
space

Steering wheel is touched during active steering
guidance into the parking space

ParkSense Front and Rear Park Assist switch is
pushed

Driver's door is opened

Rear liftgate is opened

Electronic Stability Control/Anti-Lock Braking
System intervention
The ParkSense Active Park Assist system allows a
maximum number of shifts between DRIVE and
REVERSE. If the maneuver cannot be completed
within the maximum amount of shifts, the system
will cancel and the instrument cluster display will
instruct the driver to complete the maneuver
manually.
The ParkSense Active Park Assist system will only
operate and search for a parking space when the
following conditions are present:

Gear selector is in DRIVE

Ignition is in the RUN position

ParkSense Active Park Assist switch is activated

Driver's door is closed

Rear liftgate is closed

Vehicle speed is less than 15 mph (25 km/h)

The outer surface and the underside of the front
and rear fascias/bumpers are clean and clear
of snow, ice, mud, dirt or other obstruction
4
23_WL_OM_EN_USC_t.book Page 167