Jeep GRAND CHEROKEE 4xe 2023, Руководство пользователя

Страница: 69 / 440

GETTING TO KNOW YOUR VEHICLE 67
NOTE:
If the mirrors were folded manually, by using the
power folding mirror switch on the driver’s door
panel, they will not automatically unfold.
H
EATED
M
IRRORS
— I
F
E
QUIPPED
These mirrors are heated to melt frost or
ice. This feature will be activated
whenever you turn on the rear window
defroster (if equipped)
Ú
page 75.
T
ILT
S
IDE
M
IRRORS
I
N
R
EVERSE
—
I
F
E
QUIPPED
Tilt Side Mirrors In Reverse provides automatic
outside mirror positioning which will aid the
driver’s view of the ground rearward of the front
doors. Outside mirrors will move slightly downward
from the present position when the vehicle is
shifted into REVERSE. Outside mirrors will then
return to the original position when the vehicle is
shifted out of REVERSE position. Each stored
memory setting will have an associated Tilt Side
Mirrors In Reverse position.
NOTE:
The Tilt Side Mirrors In Reverse feature can be
turned on and off using the Uconnect system
Ú
page 214.
EXTERIOR LIGHTS
H
EADLIGHT
S
WITCH
The headlight switch is located on the left side of
the instrument panel, next to the steering wheel.
The headlight switch controls the operation of the
headlights, parking lights, instrument panel lights,
and fog lights (if equipped).
Headlight Switch
Rotate the headlight switch clockwise from the
parking lights and instrument panel lights position
to the first detent to turn the headlight switch to
the AUTO position. Rotate to the second detent to
turn on headlights, parking lights, and instrument
panel lights.
The headlight switch is equipped with an AUTO and
ON detent but not an OFF detent. Headlights will be
deactivated when the headlight switch is placed in
the parking lights position. However, the Daytime
Running Lights (DRLs) will be activated along with
the front and rear marker lights. The DRLs may be
deactivated when the parking brake is engaged.
NOTE:

Your vehicle is equipped with plastic headlight
and fog light (if equipped) lenses that are lighter
and less susceptible to stone breakage than
glass lights. Plastic is not as scratch resistant as
glass and therefore different lens cleaning
procedures must be followed.

To minimize the possibility of scratching the
lenses and reducing light output, avoid wiping
with a dry cloth. To remove road dirt, wash with
a mild soap solution followed by rinsing.
1 — Rotate Headlight Control
2 — Ambient Light Dimmer Control
3 — Instrument Panel Dimmer Control
4 — Push Rear Fog Light Control
5 — Push Front Fog Light Control
CAUTION!
Do not use abrasive cleaning components,
solvents, steel wool or other abrasive materials
to clean the lenses.
2
23_WL_H_OM_EN_EE_t.book Page 67