Jeep GRAND CHEROKEE 4xe 2023, Руководство пользователя

Страница: 42 / 440

40 GETTING TO KNOW YOUR VEHICLE
NOTE:
A low key fob battery condition may be indicated by
a message in the instrument cluster display, or by
the LED light on the key fob. If the LED key fob light
no longer illuminates after a key fob button is
pushed, then the key fob battery requires
replacement.
To Lock/Unlock The Doors And Liftgate
Push and release the unlock button on the key fob
once to unlock the driver’s door, or twice within
five seconds to unlock all the doors and the
liftgate. To lock all the doors and the liftgate, push
the lock button once.
If enabled within the Uconnect system, the turn
signals will flash and other illuminated entry
features will be activated when the doors are
unlocked. When the doors are locked, the turn
signals will flash and the horn will chirp.
NOTE:

If the vehicle is equipped with the Auto Relock
feature, and is unlocked with the key fob, and
no door is opened within 60 seconds, the
vehicle will relock and the Vehicle Security
system will arm (if equipped). This feature can
be enabled/disabled within Uconnect Settings.

If one or more doors are open, or the liftgate is
open, the doors will lock. The doors will unlock
again automatically if the key fob is left inside
the passenger compartment, otherwise the
doors will stay locked.
All doors can be programmed to unlock on the first
push of the unlock button through Uconnect
Settings
Ú
page 214.
Using The Key Fob To Open/Close Vehicle
Windows — If Equipped
To Open The Windows
From outside of the vehicle, push and hold the
unlock button for up to seven seconds. All vehicle
door windows will open.
To Close The Windows
From outside of the vehicle, push and hold the lock
button for up to seven seconds. All vehicle door
windows will close.
NOTE:

This feature is enabled through Uconnect
Settings
Ú
page 214.

Vehicle must be equipped with front and rear
auto up/down windows.
Replacing The Battery In The Key Fob
The replacement battery model is one CR2450
battery.
NOTE:

Customers are recommended to use a battery
obtained from Mopar®. Aftermarket coin
battery specifications may not meet the original
OEM coin battery specifications.

Perchlorate material — special handling may
apply.

Do not touch the battery terminals that are on
the back housing or the printed circuit board.

Do not replace the coin battery if the LED on the
key fob above the top row buttons blinks when
a button is pressed. The coin battery should last
a minimum of three years with normal vehicle
usage.
1. Remove the emergency key (2) by pushing
the emergency key release button (1) on the
side of the key fob, and pulling the emergency
key out with the other hand.
23_WL_H_OM_EN_EE_t.book Page 40