Jeep GRAND CHEROKEE 2023, Руководство пользователя

Страница: 208 / 394

MULTIMEDIA 207
Using A Remote Command Through Your Owner’s Site
1. Log on to your Owner’s Site using the username and
password you used when activating your Uconnect
Services in your vehicle.
NOTE:
If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. If you have more than one vehicle registered into your
Owner’s Site, select the vehicle you want to send the
command to by clicking on its image along the top.
3. On your dashboard, you will see remote commands.
Press the desired icon to activate that feature.
4. You will then be asked to enter your Uconnect
Services Security PIN (this is the same four-digit code
established when you activated your Uconnect
Services). Please enter your Uconnect Services
Security PIN.
5. A message will appear on the screen to let you know
if the command was received by your vehicle.
Contacting Uconnect Services Customer Care (for
example, in case of an accidental lock-out) — If Equipped:
1. Contact Uconnect Services Customer Care if you are
unable to lock your vehicle through the Vehicle
Branded App or your key fob.
2. For security purposes, the Uconnect Services
Customer Care agent will verify your identity by asking
for your four-digit Uconnect Services Security PIN.
3. After providing your Uconnect Services Security PIN,
you can ask them to perform a remote command.
NOTE:
Anyone with access to your PIN may request Remote Door
Lock/Unlock. It is your responsibility to protect your PIN
appropriately.
Remote Door Lock/Unlock
Description
The Remote Door Lock/Unlock feature provides you the
ability to lock or unlock the door on your vehicle without
the keys and from virtually any distance.
Working Vehicle Conditions

The vehicle must in PARK or at a standstill.

The vehicle must be in an open area with cell tower
reception.

Your mobile device must have a cellular connection.
Requirements

Vehicle must be properly equipped with Uconnect
Services.

Vehicle must have an operable LTE (voice/data) or
4G (data) network connection. If using the Vehicle
Branded App to command your vehicle, your device
must be compatible and be connected to an operable
LTE (voice/data) or 4G (data) network connection.

Vehicle must be registered with Uconnect Services and
have an active subscription that includes the appli -
cable feature.

An ignition cycle is required for some remote
commands, such as Remote Door Lock/Unlock if
following a Remote Horn & Lights activation.
 Your Remote Door Lock/Unlock request will not be
processed if the vehicle is in motion, the ignition key is
on or during an emergency call.
NOTE:
All other remote services should be performed via your
Owner’s Site or through the Vehicle Branded App on your
compatible device.
23_W7_OM_EN_IN_t.book Page 207