Jeep GLADIATOR 2023 страница 45 Скачать руководство пользователя

Страница: 45 / 420

GETTING TO KNOW YOUR VEHICLE

Stadium Position

To return the seat bottom to the normal position, push

downward on the raised seat bottom.

EATED

EATS

— I

QUIPPED

The heated seat control buttons are located on

the center instrument panel below the

touchscreen and also in the Climate Control

touchscreen menu.



Press the heated seat button once to turn the

HI setting on.



Press the heated seat button a second time to turn the

MED setting on.



Press the heated seat button a third time to turn the

LO setting on.



Press the heated seat button a fourth time to turn the

heating elements off.

NOTE:



The engine must be running for the heated seats to

operate.



The level of heat selected will stay on until the operator

changes it.

For information on use with the Remote Start system, see

page 19.

EAR

EAT

RMREST

— I

QUIPPED

The center part of the rear seat can also be used as a rear

armrest with cupholders. To unfold it, grab the pull strap

under the head restraint and pull it forward.

Rear Seat Armrest

NOTE:

The cupholder liner can be removed for cleaning.

WARNING!



Persons who are unable to feel pain to the skin

because of advanced age, chronic illness, diabetes,

spinal cord injury, medication, alcohol use, exhaus

tion or other physical condition must exercise care

when using the seat heater. It may cause burns even

at low temperatures, especially if used for long

periods of time.



Do not place anything on the seat or seatback that

insulates against heat, such as a blanket or cushion.

This may cause the seat heater to overheat. Sitting in

a seat that has been overheated could cause serious

burns due to the increased surface temperature of

the seat.

WARNING!

Be certain that the seatback is securely locked into

position. If the seatback is not securely locked into

position the seat will not provide the proper stability for

child seats and/or passengers. An improperly latched

seat could cause serious injury.

23_JT_OM_EN_USC_t.book Page 43

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды