Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 312 / 420

310

IN CASE OF EMERGENCY

HAZARD WARNING FLASHERS

The Hazard Warning Flashers button is located on the

instrument panel below the climate controls.

Hazard Warning Flashers Button

Push the button to turn on the Hazard Warning Flashers.

When the button is activated, all directional turn signals

will flash on and off to warn oncoming traffic of an

emergency. Push the button a second time to turn off the

Hazard Warning Flashers.
This is an emergency warning system and it should not be

used when the vehicle is in motion. Use only when your

vehicle is disabled or creating a safety hazard warning for

other motorists.

When you must leave the vehicle to seek assistance, the

Hazard Warning Flashers will continue to operate even

though the ignition is placed in the OFF position.

NOTE:

With extended use the Hazard Warning Flashers may wear

down your battery.

ASSIST AND SOS SYSTEM — IF EQUIPPED

Assist And SOS Buttons

If equipped, the overhead console contains an ASSIST and

an SOS button.

NOTE:



Your vehicle may be transmitting data as authorized by

the subscriber

page 404.



The ASSIST and SOS buttons will only function if you

are connected to an operable LTE (voice/data) or 4G

(data) network, which comes as a built-in function.

These and other connected services will only be oper

able if your SiriusXM Guardian™ service is active and

you are connected to an operable LTE (voice/data) or

4G (data) network.

1 — Assist Button
2 — SOS Button

WARNING!

ALWAYS obey traffic laws and pay attention to the road.

ALWAYS drive safely with your hands on the steering

wheel. You have full responsibility and assume all risks

related to the use of the features and applications in

this vehicle. Only use the features and applications

when it is safe to do so. Failure to do so may result in an

accident involving serious injury or death.

23_JT_OM_EN_USC_t.book Page 310

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды