Jeep GLADIATOR 2023 Скачать руководство пользователя страница 31

Страница: 31 / 420

GETTING TO KNOW YOUR VEHICLE

Cloth Strap Attachment

5. Replace wiring access doors.

NOTE:

When reinstalling the door check arm attachment screw,

screw torque should be between 11.76 ft·lb / 16 N·m and

27.9 ft·lb / 38 N·m.

EAR

OOR

EMOVAL

Door Removal Warning Label

Use this QR code to access your digital

experience.
To remove the rear doors, proceed as

follows:
1. Roll down the glass window to

prevent any damage.

2. Remove the hinge pin nuts from

the upper and lower outside hinges

(using a #T50 Torx head driver).

NOTE:

The hinge pin nuts can be stowed in the Fastener Bin

under the rear seat.

Hinge Pin Nut

3. Slide the front seat(s) fully forward.

1 — Metal Hook
2 — Cloth Strap

WARNING!

Do not drive your vehicle on public roads with the doors

removed as you will lose the protection they can

provide. This procedure is furnished for use during

off-road operation only. Failure to follow this warning

can result in death or serious personal injury.

WARNING!



All occupants must wear seat belts during off-road

operation with doors removed. For information on

off-road driving tips, see

page 192.



Do not store detached doors inside of the vehicle, as

they may cause personal injury in the event of an

accident.



Assistance to remove doors may by required due to

the weight of the door to avoid personal injury.

CAUTION!



Hinge pins can break if overtightened during door

reinstall (Max Torque: 5.88 ft·lb / 8 N·m). For informa

tion on off-road driving tips, see

page 192.



Do not overtighten Torx fasteners. Damage to the

vehicle’s parts will occur.

23_JT_OM_EN_USC_t.book Page 29

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Бренды по названию

Популярные бренды