Jeep GLADIATOR 2023 страница 102 Скачать руководство пользователя

Страница: 102 / 420

100

GETTING TO KNOW YOUR VEHICLE

NOTE:

Be sure to remove the cover before returning the wind

shield to the normal position. Store the cover in the cargo

area.
Cleaning Instructions
During windshield down applications, dust/dirt can

accumulate in the cover and block the camera lens. Use a

microfiber cloth to clean the camera lens, module, and

inside cover, being careful not to damage or scratch the

module.

AISING

INDSHIELD

1. Release the strap that secured the windshield in the

lowered position.

2. Raise the windshield.
3. Using the provided #T40 Torx head driver, reinstall

the four Torx head fasteners located along the

interior of the windshield (two on each side of the

header trim). Secure them until they are snug, being

careful not to cross-thread the fasteners or

overtighten.

Step Three

4. Reinstall the windshield wiper arms using the

provided 15 mm socket. First, align the tips of the

blade to the “T” mark in the glass. Then, while holding

the arm in that position, reinstall the hex nut and

tighten until snug. Be careful not to overtighten.

Repeat for the other arm.

5. Reinstall the protective caps over the wiper arm hex

bolts and push gently until they snap into place.

Step Five

NOTE:

Make sure the windshield is raised prior to installing

the tops.

1 — Outer Torx Fasteners
2 — Center Torx Fasteners

1 — Hex Bolt Cover Installed
2 — Hex Bolt Cover Removed

23_JT_OM_EN_USC_t.book Page 100

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды