Jeep Gladiator 2021 страница 79 Скачать руководство пользователя

Страница: 79 / 484

GETTING TO KNOW YOUR VEHICLE

IND

UFFETING

Wind buffeting can be described as the

perception of pressure on the ears or a

helicopter-type sound in the ears. Your vehicle

may exhibit wind buffeting with the windows

down, or the sunroof (if equipped) in certain

open or partially open positions. This is a normal

occurrence and can be minimized. If the

buffeting occurs with the rear windows open,

open the front and rear windows together to

minimize the buffeting. If the buffeting occurs

with the sunroof open, adjust the sunroof

opening to minimize the buffeting or open any

window.

GLADIATOR TOPS

ROVIDED

OOLS

For your convenience, a tool kit is provided with

your vehicle located in the center console. This

kit includes the necessary tools required for the

operations described in the following sections.

All pieces fit into the ratchet for easy use.

NOTE:

The soft top and the hard top are to be used

independently. Your vehicle warranty will not

cover damage resulting from both tops being

installed at the same time.

Provided Tools

If your vehicle is equipped with a Dual Top, the

soft top system will be provided in a separate

box located in the bed of the vehicle for shipping

purposes only.

OWERING

OFT

Use this QR code to access your

digital experience.

1 — Ratchet
2 — #T50

Torx Head Driver

3 — #T40

Torx Head Driver

4 — 15

mm Socket

WARNING!



The fabric quarter panel cover assemblies,

rear window, and fabric top are designed

only for protection against the elements. Do

not rely on them to contain occupants

within the vehicle or to protect against

injury during an accident. Remember,

always wear seat belts.



Make sure hands and fingers are clear of

all pinch points when installing and

removing the soft top. The side bows may

cause serious injury if fingers or hands get

caught in-between.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды

Jeep Gladiator 2021, Руководство пользователя

Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды