Jeep Gladiator 2021 Скачать руководство пользователя страница 66

Страница: 66 / 484

GETTING TO KNOW YOUR VEHICLE

Rear Wall Storage Bin

To access the storage bin, pull upward on the

pull strap located on the upper outboard side of

the right rear seat, and fold the seatback

forward.

NOTE:

The rear seatback can be locked using the

vehicle key to secure items in the rear wall

storage bin. The seat lock is located on the

upper outboard side of each seatback. Both

seatbacks should be locked to limit access to

items behind seat.

Rear Wall Netting
The rear wall netting can be accessed the same

way as the rear wall storage bin.

Rear Wall Netting

Fastener Bin

Your vehicle is equipped with a Fastener Bin

used to store the fasteners for the doors,

windshield, and hard top (if equipped) while not

in use. The Fastener Bin is located behind the

rear seat storage bin. The Fastener Bin contains

foam inserts for each of the fasteners; they are

removable.
To remove the Fastener Bin:

1. Remove the lid and foam inserts from the

Fastener Bin.

2. Remove the three nuts from the bottom of

the Fastener Bin.

NOTE:

The soft top fasteners do not go in the Fastener

Bin.

Fastener Bin

AUX/USB C

ONTROL

The Media Hub is located on the instrument

panel, below the climate controls. Behind the

media hub access door, the Media Hub

contains one AUX port, a Type C USB port and

1 — Rear Wall Storage Bin
2 — Pull Strap

1 — Door Removal
2 — Under Seat Storage Bin Removal
3 — Folding Windshield
4 — Hard Top Removal

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Jeep Gladiator 2021, Руководство пользователя, Страница: 66 / 484

Результаты поиска

Содержание Gladiator 2021

Отзывы: