Jeep Gladiator 2021 страница 190 Скачать руководство пользователя

Страница: 190 / 484

188

STARTING AND OPERATING

The six ParkSense sensors, located in the front

fascia/bumper, monitor the area in front of the

vehicle that is within the sensors/ field of view.

The sensors can detect obstacles from

approximately 12

inches (30 cm) up to

inches (120 cm) from the front fascia/

bumper in the horizontal direction, depending

on the location, type and orientation of the

obstacle.

ARK

ENSE

ARNING

ISPLAY

The ParkSense Warning screen will only be

displayed if “Sound and Display” is selected

from the Customer Programmable Features

section of the Uconnect system

page

224.

The ParkSense Warning screen is located within

the instrument cluster display

page

115. It

provides visual warnings to indicate the

distance between the rear fascia/bumper and/

or front fascia/bumper and the detected

obstacle.

ARK

ENSE

ISPLAY

The warning display will turn on indicating the

system status when the vehicle is in REVERSE

or when the vehicle is in DRIVE and an obstacle

has been detected.
The system will indicate a detected obstacle by

showing a single arc in one or more regions

based on the obstacle’s distance and location

relative to the vehicle.

If an obstacle is detected in the center front

region, the display will show a single solid arc in

the center front region and will produce a

one-half second tone. As the vehicle moves

closer to the obstacle, the display will show the

single arc moving closer to the vehicle and the

sound tone will change from a single 1/2 second

tone to slow, to fast, to continuous.
If an obstacle is detected in the left and/or right

front region, the display will show a single

flashing arc in the left and/or right front region

and will produce a fast sound tone. As the

vehicle moves closer to the obstacle, the

display will show the single arc moving closer to

the vehicle and the tone will change from fast to

continuous.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды

Jeep Gladiator 2021, Руководство пользователя

Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды