Jeep Gladiator 2021 Скачать руководство пользователя страница 177

Страница: 177 / 484

STARTING AND OPERATING

175

NOTE:

The Stop/Start system will reset itself back to

an ON condition every time the ignition is turned

off and back on.

ANUALLY

URN

TOP

TART

YSTEM

Push the Stop/Start Off switch (located on the

switch bank). The light on the switch will turn

off.

YSTEM

ALFUNCTION

If there is a malfunction in the Stop/Start

system, the system will not shut down the

engine. A “SERVICE STOP/START SYSTEM”

message will appear in the instrument cluster

display

page

115.

If the “SERVICE STOP/START SYSTEM”

message appears in the instrument cluster

display, have the system checked by an

authorized dealer.

CRUISE CONTROL SYSTEMS — IF EQUIPPED

Your vehicle may be equipped with the Cruise

Control system, or the Adaptive Cruise Control

(ACC) system:



Cruise Control for cruising at a constant

preset speed.



Adaptive Cruise Control (ACC) for maintaining

a set distance between you and the vehicle

ahead using Fixed Speed Cruise Control to

automatically adjust the preset speed.

NOTE:

In vehicles equipped with ACC, if an ACC

distance is not set, Fixed Speed Cruise Control

will not detect vehicles directly ahead of you.

Always be aware of the mode selected.

RUISE

ONTROL

— I

QUIPPED

When engaged, the Cruise Control system takes

over accelerator operations at speeds greater

than 20

mph (32

km/h).

The Cruise Control buttons are located on the

right side of the steering wheel.

Cruise Control Buttons

NOTE:

In order to ensure proper operation, the Cruise

Control system has been designed to shut down

if multiple Cruise Control functions are operated

at the same time. If this occurs, the Cruise

Control system can be reactivated by pushing

the Cruise Control on/off button and resetting

the desired vehicle set speed.

1 — SET (+)/Accel
2 — CANC/Cancel
3 — SET (-)/Decel
4 — On/Off
5 — RES/Resume

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Jeep Gladiator 2021, Руководство пользователя, Страница: 177 / 484

Результаты поиска

Содержание Gladiator 2021

Отзывы: