Jeep Gladiator 2021, Руководство пользователя, Страница: 173 / 484

STARTING AND OPERATING 171
The Stop/Start feature is enabled after every
normal customer engine start. At that time, the
system will go into STOP/START READY.
To Activate The Autostop Mode, The Following
Must Occur:

The system must be in STOP/START READY
state. A STOP/START READY message will be
displayed in the instrument cluster display
within the Stop/Start section
Ú
page 115.

The vehicle must be completely stopped.

The gear selector must be in a forward gear
and the brake pedal pressed.
The engine will shut down, the tachometer will
move to the zero position and the Stop/Start
telltale will illuminate indicating you are in
Autostop. Customer settings will be maintained
upon return to an engine running condition.
P
OSSIBLE
R
EASONS
T
HE
E
NGINE
D
OES
N
OT
A
UTOSTOP
Prior to engine shut down, the system will check
many safety and comfort conditions to see if
they are fulfilled. Detailed information about the
operation of the Stop/Start system may be
viewed in the instrument cluster display
Stop/Start Screen. In the following situations,
the engine will not stop:

Driver’s seat belt is not buckled

Driver’s door is not closed

Battery temperature is too warm or cold

Battery charge is low

The vehicle is on a steep grade

Cabin heating or cooling is in process and an
acceptable cabin temperature has not been
achieved

HVAC is set to full defrost mode at a high
blower speed

HVAC set to MAX A/C

Engine has not reached normal operating
temperature

Engine temperature too high

The transmission is not in a forward gear

Hood is open

Transfer case is in 4L or N (Neutral)

Brake pedal is not pressed with sufficient
pressure

Accelerator pedal input

Vehicle speed threshold not achieved from
previous Autostop

Steering angle beyond threshold

ACC is on and speed is set

Vehicle is at high altitude

System fault present
It may be possible for the vehicle to be driven
several times without the Stop/Start system
going into a STOP/START READY state under
more extreme conditions of the items listed
above.
T
O
S
TART
T
HE
E
NGINE
W
HILE
I
N
A
UTOSTOP
M
ODE
While in a forward gear, the engine will start
when the brake pedal is released or the throttle
pedal is pressed. The transmission will
automatically re-engage upon engine restart.
4