Jeep Compass, Информационное руководство

Страница: 53 / 189

52 GETTING TO KNOW YOUR INSTRUMENT PANEL
Wait To Start Light — If Equipped
This indicator light will illuminate for
approximately two seconds when the
ignition is turned to the RUN position.
Its duration may be longer based on
colder operating conditions. Vehicle will not
initiate start until telltale is no longer displayed.
NOTE:
The “Wait To Start” telltale may not illuminate if
the intake manifold temperature is warm
enough.
G
REEN
I
NDICATOR
L
IGHTS
Active Speed Limiter SET Indicator Light
With A Premium Instrument Cluster —
If Equipped
This indicator light will illuminate
when the Active Speed Limiter is on
and set to a specific speed.
Active Lane Management Indicator Light —
If Equipped
The Active Lane Management
indicator light illuminates solid green
when both lane markings have been
detected and the system is “armed”
and ready to provide visual and torque warnings
if an unintentional lane departure occurs.
Night Vision Active Indicator Light —
If Equipped
This light alerts the driver that the
Night Vision alert status is Active.
Park/Headlight On Indicator Light
This indicator light will illuminate
when the park lights or headlights are
turned on.
CAUTION!
The presence of water in the fuel system
circuit may cause severe damage to the
injection system and irregular engine
operation. If the indicator light is illuminated,
contact an authorized dealer as soon as
possible to bleed the system. If the above
indications come on immediately after
refuelling, water has probably been poured
into the tank: switch the engine off
immediately and contact an authorized
dealer.
21_M6_EIG_EN_IN_t.book Page 52