Jeep Compass 2022, Руководство пользователя

Страница: 117 / 344

STARTING AND OPERATING 115
P
OSSIBLE
R
EASONS
T
HE
E
NGINE
D
OES
N
OT
A
UTOSTOP
Prior to engine shut down, the system will check
many safety and comfort conditions to see if they
are fulfilled. Detailed information about the
operation of the Stop/Start system may be viewed
in the instrument cluster display Stop/Start
Screen. In the following situations the engine will
not stop:

Driver’s seat belt is not buckled.

Driver’s door is not closed.

Battery temperature is too warm or cold.

Battery charge is low.

The vehicle is on a steep grade.

Cabin heating or cooling is in process and an
acceptable cabin temperature has not been
achieved.

HVAC is set to full defrost mode at a high blower
speed.

HVAC is set to MAX A/C.

Engine has not reached normal operating
temperature.

The transmission is not in a forward gear.

Hood is open.

Vehicle is in 4WD LOW transfer case mode.

Brake pedal is not pressed with sufficient pres -
sure.

Accelerator pedal input.

Engine temperature is too high.

5 mph (8 km/h) threshold has not been
achieved from previous Autostop.

Steering angle beyond threshold.

Adaptive Cruise Control is on and speed is set.
It may be possible for the vehicle to be driven
several times without the Stop/Start system going
into a STOP/START READY state under more
extreme conditions of the items listed above.
T
O
S
TART
T
HE
E
NGINE
W
HILE
I
N
A
UTOSTOP
M
ODE
While in a forward gear, the engine will start when
the brake pedal is released or the throttle pedal is
pressed. The transmission will automatically
re-engage upon engine restart.
Conditions That Will Cause The Engine To Start
Automatically While In Autostop Mode:

The transmission selector is moved out of
DRIVE (D).

To maintain cabin temperature comfort.

HVAC is set to full defrost mode.

HVAC system temperature or fan speed is
manually adjusted.

Battery voltage drops too low.

Stop/Start OFF switch is pressed.

A Stop/Start system error occurs.

Vehicle is in 4WD LOW transfer case mode.
Conditions That Force An Application Of The
Electric Park Brake While In Autostop Mode:

The driver’s door is open and brake pedal
released.

The driver’s door is open and the driver’s seat
belt is unbuckled.

The engine hood has been opened.

A Stop/Start system error occurs.
If the Electric Park Brake (EPB) is applied with the
engine off, the engine may require a manual
restart and the EPB may require a manual release
(press brake pedal and press EPB switch)
Ú
page 77.
4
22_MP_OM_EN_USC_t.book Page 115