Jeep compass 2017, Руководство пользователя

Страница: 33 / 429

Auto Lock Doors Programming
The Automatic Door Locks feature can be enabled or
disabled as follows:
•
For vehicles equipped with the instrument cluster dis-
play, refer to “Instrument Cluster Display — If
Equipped/Personal Settings (Customer Programmable
Features)” in “Getting To Know Your Instrument Panel”
for further information.
•
For vehicles not equipped with the instrument cluster
display, perform the following procedure:
1. Close all doors and place the key in the ignition.
2. Within 15 seconds, place the ignition between LOCK
and ON/RUN and then back to LOCK four times,
ending up in the LOCK position (do not start the
engine).
3. Within 30 seconds, push the power door LOCK
switch to lock the doors.
4. A single chime will indicate the completion of the
programming.
5. Repeat these steps if you want to return this feature
to its previous setting.
NOTE:
•
If you do not hear the chime, it means that the system
did not enter the programming mode and you will need
to repeat the procedure.
•
Use the Automatic Door Lock feature in accordance with
local laws.
Automatic Unlock Doors On Exit
The doors will unlock automatically if:
•
The Automatic Unlock Doors On Exit feature is enabled.
•
The transmission was in gear, and the vehicle speed
returned to 0 MPH (0 km/h).
•
The transmission is in NEUTRAL or PARK.
•
The driver’s door is opened.
•
The doors were not previously unlocked.
3
GETTING TO KNOW YOUR VEHICLE 31