IN CASE OF EMERGENCY
255
(Continued)
FUSES
General Information
The fuses protect electrical systems against
excessive current.
When a device does not work, you must check
the electrical circuit inside the fuse for a break/
melt.
Also please be aware that when using power
outlets for extended periods of time with the
engine off may result in vehicle battery
discharge.
Blade Fuses
Access To The Fuses
The fuses are grouped into four controllers
located in the engine compartment, under the
instrument panel and on the inside of the left
side cargo trim panel.
Halogen lamps contain gas under pressure,
in the event of breakage be careful of the
projection of fragments of glass.
Halogen lamps must be handled by
touching only the metallic part. If the trans
-
parent bulb is in contact with the fingers,
reduces the intensity of the emitted light
and you can also affect the life of the lamp.
In case of accidental contact, rub the bulb
with a cloth dampened with alcohol and
allow to dry.
WARNING!
When replacing a blown fuse, always use
an appropriate replacement fuse with the
same amp rating as the original fuse. Never
replace a fuse with another fuse of higher
amp rating. Never replace a blown fuse with
metal wires or any other material. Failure to
use proper fuses may result in serious
personal injury, fire and/or property
damage.
WARNING!
(Continued)
Before replacing a fuse, make sure that the
ignition is off and that all the other services
are switched off and/or disengaged.
If the replaced fuse blows again, contact an
authorized dealer.
If a general protection fuse for safety
systems (air bag system, braking system),
power unit systems (engine system,
gearbox system) or steering system blows,
contact an authorized dealer.
WARNING!
(Continued)
1 — Fuse Element
2 — Blade Fuse with a good/functional fuse ele
-
ment.
3 — Blade fuse with a bad/not functional fuse el
-
ement (blown fuse).
6
20_BV_OM_EN_USC_t.book Page 255
Содержание 2020 RENEGADE
Страница 482: ......