Jeep 2015 Renegade Скачать руководство пользователя страница 123 | Manualshive

Страница: 123 / 668

Jeep 2015 Renegade Скачать руководство пользователя страница 123

Air Recirculation

Push and release the Air Recirculation button so that the
LED is on, to enter recirculation mode. It is recommended
to turn the internal air recirculation on while standing in
traffic or in tunnels to prevent the introduction of pol-
luted air.

Do not use the function for a long period of time,
particularly if there are many passengers in the vehicle,
to prevent the windows from misting up.

NOTE:

Internal air recirculation makes it possible to

reach the required heating or cooling conditions quickly
depending on the mode selected. Do not use the internal
air recirculation function on rainy/cold days as it would
considerably increase the possibility of the windows
misting.

System Maintenance

In Winter, the Climate Control system must be turned on
at least once a month for approximately 10 minutes.

Have the system inspected at an authorized dealership
before the summer.

NOTE:

The system uses R-1234yf (refrigerant) which

does not pollute the environment in the event of acciden-
tal leakage. Under no circumstances is the use of R-134a
(refrigerant) allowed.

4

GETTING TO KNOW YOUR VEHICLE

121

«
...
121
122
123
124
125
...
»

Содержание 2015 Renegade





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов