H O R U S S C O P E
Quick
Reference
Guide
Step 1
Slide upward from charging base OR
remove from USB charger.
Step 2
Ensure the device is adequately charged
(solid blue light on power indicator/handle
when the device is powered on).
Step 3
Attach appropriate viewing lens as follows:
Ensure the device is powered off.
Find and match the lens alignment marks
(small black circles).
Insert the lens into the Horus Scope
connector interface.
Rotate the lens attachment gently clockwise
until it stops.
Ensure the white position bars are in the
appropriate horizontal position.
Step 4
Connect device to Telehealth unit as follows:
Connect the AV (out) cord with the converter.
Connect the converter to the Telehealth unit.
Some units may require an additional cable to connect
the Telehealth unit to the converter (e.g., SX20).
December 2018
Page 1