Jeckson Electric 47-1013A-T Скачать руководство пользователя страница 1

Owner's Manual 

Wall Switch Style RF Controller, 433MHz 

MODEL: 47-1013A-T, 47-1013B-T 

FCC ID: ELY547-47-1013

-

T      IC 1492

 

A-471013T 

 

REMOTE CONTROL 

The remote control has a range of approximately 50 ft. (15.25m), it does not have to be 
pointed at the fireplace and can pass through most obstacles (including walls).   

 
BATTERY INSTALLATION 

1.  Depress tab on the battery cover on the side of the remote transmitter and remove 

battery cover. 

2.  Install 2 AAA batteries into the remote control. (included) 
3.  Replace the battery cover. 

 
AC24V INSTALLATION 

1.  Depress tab on the cover on the back of the remote transmitter and remove the wire 

compartment cover. 

2.  Remove the 2 lead wires from the wire compartment. 
3.  Connect the wires to the AC24V hard wires. 
4.  Replace the cover. 

Note:   

There is an internal electronic switch to disconnect the AAA Battery 
power supply when the AC24V~ hard wire hook up is made.   

 

FLAME ON/OFF BUTTON 

 

Press the right 

  to turn the Flame ON or press the left 

  to turn the Flame OFF.   

 

PURIFIRE ON/OFF BUTTON 

 

(For 47-1013A-T version only) 

Press the right 

  to turn the Purifire ON or press the left 

  to turn the Purifire OFF.   

 

 

COUNTDOWN TIMER 

 

(For 47-1013B-T version only) 

 

To  set  the  Countdown  timer,  press  the  left 

  or  right 

  buttons  to  decrease  or 

increase by 30 minute decrements or increments. The countdown timer can be set from 30 

Отзывы: