Jeanneau SUN ODYSSEY 440, Руководство пользователя

Страница: 51 / 240

- 51 -
189212 RCD-2
Index C
6.1.2 Getting back onboard
The means for getting back onboard must be able to be deployed by one person alone in the
water, with no other help.
Description of the installation stages::
Assembling the ladder:
- Take the ladder out of its case and fit the ladder by tying a lark's head type knot. The knot
must face outside.
- Place the flap of the case between the loop of the ladder and the first step.
- Screw on the flap with the two bolts and nuts on the back. The nuts should be on the back
of the case to ensure they do not prevent the ladder from being taken out for use.
- Adjust the length of the cord to reach the water level and check that the ladder is properly
released. It is important to ensure that the ladder extends smoothly into the water. Attach the
end of the cord to the swivel plate provided for this purpose. Finally stow away the ladder and
close the internal flap with press studs.
Installation of means to get back on board in
the event of an accidental fall:
(Ref 1):
6
SAFETY