background image

- 155 -

197895 RCD-2

Index B

13  ENGINE

13.1  INFORMATION RELATING TO FIRE RISKS AND RISKS OF EXPLOSION

- Make sure that the coolant is circulating properly.
- Ensure that ventilation openings in the compartment fuel tank are not obstructed.
- Stop the engine and refrain from smoking while the fuel tank is being filled.
- Have your fuel circuit checked regularly by a professional engineer.
- Avoid any contact between inflammable materials and the hot sections of the engine.
- Never switch off or cut off energy to the electric system when the engine is running.
- Never block access to the fuel supply valve.
- Do not obstruct or modify the ventilation system.
- Never turn the engine over when the boat is on land.
- Fuel stored outside the tanks (jerrycans, portable fuel tanks, etc.) must be stowed on deck 

and protected from bad weather and mechanical damage.
- Regularly check that the petrol tank compartment is clean and dry.

Fuel supply valve (Port engine & Starboard 

engine)

located directly on the tank

13

ENGINE

Содержание LEADER 33 OUTBOARD







































































































































































































Отзывы: