A-15929
Rev. 2
www.reelcaddy.com
www.jdvproducts.com
JDV Products, Inc.
(Wire Not Included)
U1000
reusable cable
reel and
RBC1
brake kit
sold separately.
Model #
RC01S
(Wire Not Included)
Model #
RC01L
4. How to use the Included Brake Kit RCB1:
Instructions on how to use Brake Kit RCB1:
A. The ReelCaddy Series comes standard with a “flat” plastic spacer.
Keep this flat spacer at the bottom of the spool rod.
B. Load cable reel onto ReelCaddy.
(Follow steps on page 3 for proper loading technique).
C. In upright position and with T-handle off, slide the Brake and plastic spacer
(RCB1 Brake Kit) over spool rod. The brake’s piston needs to be facing
downward towards reel, and the spacer needs to sit in between the brake and
flange of cable reel. The RCB1 brake set is now positioned on top of the cable
reel flange.
D. Loosen the brake knob.Push brake against the plastic spacer, which is against
the cable reel, and apply pressure so that the brake’s piston is
slightly depressed (applying friction toward the cable reel flange).
E. Tighten brake to spool rod by tightening both hex bolts. (Use 1/2” wrench)
F. Attach the T-handle and put the ReelCaddy in dispensing position.
G. Finger- tighten the “brake knob” to set friction against the cable reel.
The more you tighten the brake knob (clockwise), the more friction it provides
against the cable reel.
H. Now, you are ready to dispense the wire.
JDV Products, Inc.
22-01 Raphael Street, Fair Lawn, NJ 07410
Tel: 201-796-1720 Fax: 201-796-9399
www.reelcaddy.com www.jdvproducts.com
FLAT PLASTIC
SPACER
Brake Kit Includes:
(1) Brake
(1) Flat Plastic Spacer
BRAKE
BRAKE KNOB
BRAKE
PISTON
SPOOL ROD
HEX BOLTS
FLAT PLASTIC SPACER
(COMES WITH REELCADDY)
ANY TYPE OF
CABLE REEL
RCBI
BRAKE
KIT
FLAT PLASTIC
SPACER
